BMW U11 X1 xLine Utah orange metallic three quarter front view still in front of building

THE X1

BMW X1: ENGINES & TECHNICAL DATA.

THE X1 BMW X1: ENGINES & TECHNICAL DATA.
BMW X1: Highlights

The key facts and figures for the new BMW X1 at a glance:

  • Engine, consumption and CO2 emissions
  • Performance data such as displacement, hp, Nm and acceleration
  • Weight, dimensions, wheel and tyre sizes
Read more

TECHNICAL DATA.

Select model

Total Powertrain

Powertrain type Petrol
Power in kW (hp) 90 (122)
Torque in Nm 230
Transmission 7-speed, automatic
Drivetrain Front-wheel drive

TwinPower Turbo internal combustion engine

Cylinders 3
Displacement in cm³ 1499
Nominal power in kW (hp)/1/min 90 (122) / 3,900-6,500
Nominal torque in Nm/1/min 230/1500-3600

Electric motor

(Nominal) power/30 minutes power in kW (hp) -
(Nominal) torque in Nm -

Performance

Acceleration 0–100 km/h in s 10.5
Maximum speed in km/h 200
Electric top speed in km/h -

Fuel economy/CO2 emissions

Fuel consumption, combined WLTP in l/100 km 6.8
CO2 emissions, combined WLTP in g/km 156
Energy consumption, combined WLTP in kWh/100 km -
Electric range, WLTP in km -

High-voltage/48 volt battery, charging

Battery capacity in kWh -
Maximum charging power AC/DC in kW -
Charging time DC 10–80% in min -
Charging time AC 0–100% in h -

Dimensions/weights

Length/width/height in mm 4500/1845/1642
Wheelbase in mm 2692
Curb weight in kg 1575
Luggage capacity in l 540-1600
Fuel capacity in l 47
Optionally delivered with support for trailer load, braked, up to 12%/towbar download in kg 750/1700
BMW wheels and tyres EU tyre label close-up

BMW WHEELS & TYRES.

We subject the tyres for our vehicles to stringent tests with up to 50 different quality criteria – significantly more than prescribed by the uniform tyre labelling regulation that applies throughout Europe. This is where you will find all the information on the properties of the tyres used at BMW.
​

Fuel consumption and CO2 emissions.

  • BMW sDrive16i xLine
    Fuel consumption, combined WLTP in l/100 km: 6.8
    CO2 emissions, combined WLTP in g/km: 156

    BMW sDrive16i M Sport
    Fuel consumption, combined WLTP in l/100 km: 6.8
    CO2 emissions, combined WLTP in g/km: 156

    The values of the vehicles labelled with (2) are preliminary.

    The values of fuel consumptions, CO2 emissions and energy consumptions shown were determined according to the European Regulation (EC) 715/2007 in the version applicable at the time of type approval. The figures refer to a vehicle with basic configuration in Germany and the range shown considers optional equipment and the different size of wheels and tires available on the selected model.

    The CO2 efficiency specifications are determined according to Directive 1999/94/EC and the European Regulation in its current version applicable. The values shown are based on the fuel consumption, CO2 values and energy consumptions according to the NEDC cycle for the classification.

    For further information about the official fuel consumption and the specific CO2 emission of new passenger cars can be taken out of the „handbook of fuel consumption, the CO2 emission and power consumption of new passenger cars“, which is available at all selling points and at https://www.dat.de/angebote/verlagsprodukte/leitfaden-kraftstoffverbrauch.html

    All technical data are indicative only and varies as per market and configuration. For more information, please check with your local dealer for all fuel consumption and CO2 emissions.

The figures for performance, consumption and CO2 emissions refer to vehicles with standard transmission.

⁽¹⁾ Performance data of petrol engines apply to vehicles using RON 98 fuel. Fuel consumption data apply to vehicles using reference fuels in accordance with EU Regulation 715/2007. Unleaded RON 91 and higher with a maximum ethanol content of 10% (E10) may also be used. BMW recommends RON 95 fuel. For high-performance automobiles, BMW recommends RON 98 fuel.

⁽²⁾ For plug-in hybrid: Electric drive depending on battery charging level.

⁽³⁾ For plug-in hybrid: At temperatures below freezing, the fully electric drive system is only available after a few kilometres of driving, once the battery has heated to operational temperature.

⁽⁴⁾ Official data for fuel consumption, CO2 emissions, power consumption and electric range was determined in accordance with the prescribed measuring procedure and corresponds to European Regulation (EC) 715/2007 in the applicable version. For ranges, data determined as per WLTP takes into account any optional equipment (available on the German market in this case). For vehicles that have been newly type approved since 1 January 2021, only the official data according to WLTP exists. For more information about NEDC and WLTP measuring procedures visit www.bmw.com/wltp

⁽⁵⁾ For plug-in hybrid: Weighted, combined (EC AC Charge Weighted)

⁽⁶⁾ Range depends on various factors, in particular: individual driving style, route characteristics, outside temperature, heating/air conditioning, pre-conditioning.

⁽⁷⁾ The charging performance depends on the state of charge, ambient temperature, individual driving profile and use of auxiliary consumers. The ranges shown are based on the WLTP best case. The charging times apply to ambient temperatures of 23 degrees Celsius after a preceding drive and may differ depending on the usage behaviour.

⁽⁸⁾ The EC unladen weight refers to a vehicle with standard equipment and does not include any optional extras. The unladen weight includes a 90% full tank and a driver weight of 75 kg. Optional equipment may affect the weight of the vehicle, the payload and the top speed if the selected equipment has an impact on the vehicle's aerodynamics.


⁽⁹⁾ Composed of combustion engine drive (specified nominal value) and electric drive (up to specified nominal value). Electric drive depending on battery charging level.

⁽¹⁰⁾ Composed of combustion engine drive (specified nominal value) and electric drive (up to  specified nominal value).

Read more